Construction excavator vibrating tamping compact rammer, vibrating plate compactor
Construction excavator vibrating tamping compact rammer
Hydraulic vibration rammer is mainly used with excavator, installed in the original bucket position on the front-end of boom, using the excavator's hydraulic drive and control. Simple structure, convenient in operation and maintenance. Applicable to a variety of terrain and a variety of operation ways. lt can complete plane compaction, inclined plane compaction, the steps to consolidate, cement pits of groove and other complex foundation ramming processing.
PRODUCT FEATURES
1. Made of high strength steel plate,easy to install,easy to use.
2. Installed with high strength ripper teeth,strong digging capacity;
3. Convenient for digging and loading at the same time,high efficiency.
4. Suitable for shoving hard substances such as hard rocks,frozen ground,stone and weathered granite to facilitable later operation.
Detailed Images
Use American Eton Hydraulic Motor
Korean rubber shock absorber
Reasonable Hydraulic Design
Reasonable Hydraulic Design
Product Case
FULL AUTOMATIC DOUBLE SAFETY SYSTEM
Electronic drive system is installed in the cab,the expensive hydraulic pressure is replaced by the electric power,which saves the cost from the production.Operators in the cab can easily turn on and turn off the quick hitch through the switch.
Check valve Protection System:each cylinder installed safety check valve ensures that quick hich coupler can work when the oil circuit and the circuit is cut off.
Safety Pin Protection System:security protection is customized for each excavator according to the different parameters.In the case of the failure of cylinder, quick hitch coupler can work regularly.
1. Import sweden bearing,lower noise,higher reliable
2. Import American pike hydraulic vibrate motor,more sturdy and durable
3. Key position is used of high strength and wear-resisting to ensure the quality
Performance Parameter
| Model | Unit | BYKC 60 | BYKC 150 | BYKC 200 | BYKC 300 |
| ApplicableExcavator | Ton | 4-9 | 11-16 | 17-23 | 23-30 |
| Power of impulse | Ton | 4 | 6.5 | 15 | 15 |
| Vibrationfrequency | Rpm | 2000 | 2000 | 2000 | 2000 |
| Oil Flow | L/min | 45-75 | 85-105 | 120-170 | 120-170 |
| Pressure | Kg/cm2 | 100-130 | 100-130 | 150-200 | 150-200 |
| Weight | Kg | 300 | 500 | 900 | 950 |
| BottomMeasurement | L*W*T mm | 900*550*16 | 1160*700*28 | 1350*900*30 | 1350*900*30 |
| Height | Mm | 760 | 920 | 1060 | 1100 |
| Width | Mm | 550 | 700 | 900 | 900 |
