2018 High quality Hitachi Track Adjuster - 250T/300T Twin Ram Hydraulic machine Hydraulic Track Link Press Machine – Globe Truth
2018 High quality Hitachi Track Adjuster - 250T/300T Twin Ram Hydraulic machine Hydraulic Track Link Press Machine – Globe Truth Detail:
300T Twin Ram Hydraulic machine Operation
250tons hydraulic track pin press. Fix different pitches(<228mm) of track links like PC60-PC400, D2-D8 etc
300tons hydraulic track pin press.Fix different pitches(<260mm) of track links like PC60-PC800, D2-D11etc.
Track press description
|
1 |
Hydraulic press |
300T |
|
2 |
RAM SPEED FORWARDS AND REVERSE |
190X2mm |
|
3 |
Worktable Height Adjustment |
825mm |
|
4 |
Motor power |
5.5KW |
|
5 |
PUMP FLOW RATE |
40ML |
|
6 |
PUMP PRESSURE |
36MPa |
|
7 |
Press link machine dimension |
1880X580X1350MM |
|
8 |
HYDRAULIC OIL TANK CAPACITY |
150L |
|
9 |
Voltage |
380V 50Hz three-phase |
|
10 |
Pitches |
≤317mm |
|
11 |
Model | Fit for PC60-PC400,D20-D355,D9N,D10 |
ASSEMBLING OPERATION
DISASSEMBLING OPERATION
Track Press machine Assembly and disassembly Operation Pay attention :
1.We must fill antifriction oil into the oil tank before start the operation
2.Please inspect the motor is under the corotation condition (please check the motor corotation mark)
3.Up and down board has been already tuned, please don’t adjust casually
4.When assembling the track link section, please adjust the mold according to the link pitch
5.When disassembling the tracking link, please fit the disassembly head in one side of the cylinder,and use the guard to ward off the track link in other side of the cylinder .
Track press part
Track-press-mold
Assembling mold and disassembling mold Pitch form154,171 ,175,190, 203,216,228,260,280
Track press machine Packing and Shipping
Product detail pictures:
Related Product Guide:
We always think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as the living for 2018 High quality Hitachi Track Adjuster - 250T/300T Twin Ram Hydraulic machine Hydraulic Track Link Press Machine – Globe Truth, The product will supply to all over the world, such as: panama, Eindhoven, Italy, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Debby from Greece - 2018.12.11 11:26
The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
By Frances from Croatia - 2017.10.25 15:53
